Datasheet

www.apem-idec.eu
D-065
HE1B Basic Three-position Enabling Switches
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Enabling Switches
HE1B
HE2B
HE3B
HE5B
HE6B
HE2G
HE1G-L
Actuator w/
Plastic Holder
3-position enabling switch to avoid hazards.
Ideal for installing in teach pendants and other enabling devices.
• See website for details on approvals and standards.
HE1B
Shape Mounting Style Contact Conguration Part No. Ordering No. Package Quantity
Side Mounting
1 contact (3-position)
HE1B-M1 HE1B-M1PN10
10
Top Mounting HE1B-M1N HE1B-M1NPN10
• Minimum applicable load (reference value): 3V AC/DC, 5 mA
Ratings
Contact Ratings
Rated Insulation Voltage (Ui) 250V
Rated Thermal Current (Ith) 5A
Rated Voltage (Ue) 30V 125V 250V
Rated Current (Ie)
AC 50/60 Hz
Resistive Load (AC-12) — 3A 1.5A
Inductive Load (AC-15) — 1.5A 0.75A
DC
Resistive Load (DC-12) 2A 0.4A 0.2A
Inductive Load (DC-13) 1A 0.22A 0.1A
Contact Conguration (3-position switch) 1 contact
• Minimum applicable load (reference value): 3V AC/DC, 5 mA
(Applicable range is subject to the operating conditions and load.)
Specifications
Applicable Standards
UL508 (UL recognized), CSA C22.2, No. 14 (c-UL recognized), IEC/EN 60947-5-1,
IEC/EN 60947-5-8 (TÜV approval), IEC/EN60947-5-1, UL508 (UL recognized),
CSA C22.2 No.14 (c-UL recognized)
Applicable Standards for Use
ISO 12100-1, -2/EN12100-1, -2, IEC 60204-1 / EN 60204-1
ISO 11161 / prEN 11161, ISO 10218 / EN 775, ANSI/RIA R15.06, ANSI B11.19
Operating Temperature –25 to +60°C (no freezing)
Relative Humidity 45 to 85% (no condensation)
Storage Temperature –40 to +80°C (no freezing)
Pollution Degree 2
Contact Resistance 50 mΩ maximum (initial value)
Insulation Resistance 100 MΩ minimum (500V DC megger)
Impulse Withstand Voltage 2.5 kV
Operating Frequency 1,200 operations per hour
Mechanical Durability
Position 1 → 2 → 1: 1,000,000 operations
Position 1 → 2 → 3 → 1: 100,000 operations
Electrical Durability 100,000 operations minimum
Shock Resistance
Operating extremes: 150 m/s
2
Damage limits: 1,000 m/s
2
Vibration Resistance
Operating extremes: 5 to 55 Hz, amplitude 0.5 mm
Damage limits: 16.7 Hz, amplitude 1.5 mm
Terminal Style Solder terminal
Applicable Wire 1 cable, 0.5 mm
2
maximum
Terminal Soldering Heat Resistance 310 to 350°C, 3 seconds maximum
Terminal Tensile Strength 20N minimum
Mounting Screw Recommended Tightening
Torque
HE1B-M1: M3 screw / 0.5 to 0.8 N·m
HE1B-M1N: M2.6 screw / 0.4 to 0.6 N·m
Degree of Protection IP40, except terminals (IEC 60529)
Conditional Short-circuit Current 50A (250V) (Use 250V/10A fast-blow fuse for short-circuit protection.)
Direct Opening Force
30N minimum (position 2 → 3)
Operator Strength 250N minimum
Weight (approx.) 6g