Datasheet

ManualsBrandsIDEC ManualsAutomationInterlock Switch with Solenoid, IP67, Screw Terminal

HS1L Interlock Switches with Solenoid

Ratings

Contact Ratings

Rated Insulation Voltage (Ui)

300V

Rated Operating Current (Ith)

10A

Rated Operating Voltage (Ue)

30V 125V 250V

Rated

Operating

Current

(Ie)

Resistive Load (AC-12)

10A 10A 6A

Inductive Load (AC-15)

10A 5A 3A

Resistive Load (DC-12)

8A 2.2A 1.1A

Inductive Load (DC-13)

4A 1.1A 0.6A

• Minimum applicable load (reference value): 3V AC/DC, 5mA

(Applicable range may vary with operating conditions and load types.)

• TÜV rating: AC-15 3A/250V, DC-13 4A/30V

UL, c-UL rating: A300

Pilot duty: AC 3A/250V

Pilot duty: DC 4A/30V

• CCC rating: AC 15 3A/250V, DC-13 4A/30V

Solenoid Unit and LED Indicator

Lock Mechanism

Spring Lock Solenoid Lock

Solenoid

Rated Operating

Voltage

24V DC (100% duty cycle)

Rated Current 200 mA (initial value)

Coil Resistance 120Ω (at 20°C)

Pickup Voltage Rated voltage × 85% max. (at 20°C)

Dropout Voltage Rated voltage × 10% max. (at 20°C)

Maximum Continuous

Applicable Voltage

Rated voltage × 110%

Maximum Continuous

Applicable Time

Continuous

Insulation Class Class F

LED

Rated Operating

Voltage

24V DC

Rated Current 10 mA

Light Source LED

Illumination Color Green (G), Red (R)

Specifications

Applicable Standard

ISO14119

IEC60947-5-1

EN60947-5-1 (TÜV approved)

GS-ET-19 (TÜV approved)

UL508 (UL listed)

CSA C22.2 No. 14 (c-UL listed)

GB14048.5 (CCC approved)

IEC60204-1/EN60204-1

(applicable standards for use)

Operating Temperature −20 to +55°C (no freezing)

Relative Humidity 45 to 85% (no condensation)

Storage Temperature –40 to +80°C (no freezing)

Pollution Degree 3

Overvoltage Category III

Impulse Withstand

Voltage

4.0 kV

(between LED, solenoid and ground: 1.5 kV)

Contact Resistance 50 mΩ maximum (initial value)

Insulation Resistance

Between live and dead metal parts:

100 MΩ minimum (500V DC megger)

Between terminals of different poles:

100 MΩ minimum (500V DC megger)

Electric Shock

Protection

Class II (IEC 61140)

Degree of Protection IP67 (IEC 60529)

Shock Resistance Damage limits: 1000 m/s

Vibration Resistance

Operating extremes:

10 to 55 Hz, amplitude 0.35 mm

Damage limits: 30 Hz, amplitude 1.5 mm

Actuator Operating

Speed

0.05 to 1.0 m/s

Direct Opening Travel 11 mm minimum

Direct Opening Force 50N minimum

Actuator Retention

Force when Locked

3000N minimum (GS-ET-19)

See page 87 for dimensions.

Operating Frequency 900 operations per hour

Mechanical Durability 1,000,000 operations minimum (GS-ET-19)

Electrical Durability

100,000 operations minimum

(AC-15 3A/250V)

1,000,000 operations minimum

(24V AC/DC, 100mA)

(operating frequency 900 operations per hour)

Conditional Short-circuit

Current

100A (250V) (Use 250V/10A fast acting type

fuse for short-circuit protection.)

Weight (approx.) 450g (HS1L-DQ44)

3000N locking strength (largest in class)! *

Suitable for large and heavy doors.

•Same actuator as HS1E (actuator retention force 3000N)

•Six contacts in a compact housing (same size as HS1E)

•Same dimensions and mounting hole layouts as HS1E

(Size: 35 × 104 × 129 mm)

•Door open, closed, and locked statuses can be monitored

for various applications.

•Energy efficient new solenoid unit. 32% less solenoid

current consumption compared with HS1E.

•Manual unlock key and LED indicator are standard.

•Manual unlock key allows for manual unlocking in the event

of power failure or maintenance.

•Indicator has an independent circuit, and can be used for

various purposes.

•Two locking mechanisms to choose from—spring lock

(unlocked with energized solenoid) or solenoid lock (locked

with energized solenoid).

•M3 terminal screws for wiring.

•Wide operating temperature range (–20 to +55°C).

(Zinc Diecast)

Manual

Unlock Key

L-shaped Actuator

(3000N) (SUS304)

Angle Adjustable (vertical)

Actuator (3000N) (SUS304)

Straight Actuator

(3000N) (SUS304)

LED

Indicator

* As of December 2011, according to IDEC research of

plastic interlock switches with solenoid.

Summary of content (8 pages)

PAGE 1
HS1L Interlock Switches with Solenoid 3000N locking strength (largest in class)! * Suitable for large and heavy doors. • Same actuator as HS1E (actuator retention force 3000N) • Six contacts in a compact housing (same size as HS1E) • Same dimensions and mounting hole layouts as HS1E (Size: 35 × 104 × 129 mm) • Door open, closed, and locked statuses can be monitored for various applications. • Energy efficient new solenoid unit. 32% less solenoid current consumption compared with HS1E.
PAGE 2
HS1L HS1L Interlock Switches with Solenoid Parts and Functions Conduit Port Contact Mechanism (M3) Locking Ring Terminal Block (M3) LED Indicator Straight Actuator (3000N) (SUS304) Manual Unlock Key L-shaped Actuator (3000N) (SUS304) Locking Ring Angle Adjustable (vertical) Actuator (3000N) (SUS304) (Zinc Diecast) Two Actuator Entry Slots Part No.
PAGE 3
HS1L Interlock Switches with Solenoid Interlock Switch Lock Mechanism Circuit Code (+) X2 R LED (–) X1 Door Monitor Lock Monitor (Actuator Inserted) (Solenoid OFF) (+) (–) A2 A1 Main: 1NC+1NC Main circuit: Monitor circuit: Monitor circuit: Monitor circuit: Monitor circuit: Door monitor: 1NO/1NC Lock monitor: 2NC 11 21 33 Main: 1NC+1NC 1NC+1NC Spring Lock DQ Main circuit: Main circuit: Monitor circuit: Monitor circuit: Main circuit: Main circuit: Monitor circuit: Monitor circuit: (+) X2 LED
PAGE 4
HS1L HS1L Interlock Switches with Solenoid Dimensions and Mounting Hole Layouts Interlock switch when using straight actuator (HS9Z-A1S) Interlock switch when using L-shaped actuator (HS9Z-A2S) 104 88 33 5 (65.8) Actuator mounting reference position 89 89 ws cre S M5 45 63 4- ✩ When using the actuator entry slot vertical to the mounting panel. 5.5 5 40 35 4 Slot Plug (supplied with the switch) (Note) HS9Z-A2S Actuator Rubber Bushing 36 1.
PAGE 5
HS1L Interlock Switches with Solenoid Circuit Diagrams and Operating Characteristics Spring Lock Status 1 Status 2 Status 3 • Door Open • Machine cannot be operated • Solenoid energized • Door Closed • Door Closed • Machine cannot be • Machine ready to operated operate • Solenoid de-energized • Solenoid energized Interlock Switch Status Status 4 Manual Unlock • Door Open • Machine cannot be operated • Solenoid de-energized • Door Closed • Machine cannot be operated • Solenoid de-energized Door Stat
PAGE 6
HS1L HS1L Interlock Switches with Solenoid Safety Precautions • In order to avoid electric shock or fire, turn power off before installation, removal, wire connection, maintenance, or inspection of the interlock switch. • If relays are used in the circuit between the interlock switch and the load, consider the danger and use safety relays, since welded or sticking contacts of standard relays may invalidate the functions of the interlock switch.
PAGE 7
HS1L Interlock Switches with Solenoid Instructions Mounting Examples Safety Precautions Install the interlock switch and actuator referring to the figures below. Application on Sliding Doors Door Interlock Switch HS9Z-A1S Latch Door Stop Application on Hinged Doors Door Before manually unlocking the interlock switch, make sure that the machine has come to a complete stop.
PAGE 8
HS1L HS1L Interlock Switches with Solenoid Instructions Recommended Tightening Torque Use IP67 cable glands. • • • • • 9 mm max. When Using Flexible Conduit (Example) Flexible conduit example: VF-03 (Nihon Flex) Conduit Port Size Plastic Cable Gland G1/2 – Metal Cable Gland RLC-103 (Nihon Flex) PG13.5 – RBC-103PG13.5 (Nihon Flex) M20 – RLC-103EC20 (Nihon Flex) HS1L interlock switch: 3.2 to 3.8 N·m (four M5 screws) (Note) Lid: 0.9 to 1.1 N·m (M4 screws) Terminal: 0.6 to 0.