Actuators for Safety Products HS1 HS5 HS6 Door Handle Actuator A door can be locked with an actuator by pushing and turning the handle. Series Slide Handle Actuator Shock-resistant metal slide handle actuators ensure safety. Wide variety of actuators support flexible installation of interlock switches 2-step Action 2-step sliding action prevents errors. Easy and secure pushbutton Operation Pressing a red mushroom pushbutton in an emergency situation—the established safety measure.
Safety Products HS1/HS5/HS6 Series Actuators Actuators for HS5 Series Actuators See interlock switch pages or instruction manuals for selection and installation of actuators. Actuator Part No. (Ordering Part No.
HS1/HS5/HS6 Series Actuators Straight (HS9Z-A51) Straight with Rubber Bushings (HS9Z-A51A) 7.3 4.3 32.4 (6) 0.8 Switches & Pilot Lights Actuator Mounting Hole Layout (Straight, Right-angle) 2-M4 Screw 20 Note: Actuator Stop (supplied with the actuator) * The mounting center distance is set to 12 mm Actuator Mounting Hole Layout (Straight with Rubber Bushings) (Right-angle with Rubber Bushings) 2-M4 Screw * Mounting centers can be widened to 20mm by Rubber Bushing moving the Rubber Bushings.
HS1/HS5/HS6 Series Actuators Safety Products Dimensions (HS5 Series) All dimensions in mm. Note: Actuator Stop Film (supplied with the actuator) 48.4 20° APEM 19.5 (Vertical Swing) Switches & Pilot Lights R2 1 1 (M4 Hole 3.6 ) 8 16.6 38 Angle Adjustment (M3 hexagon socket head bolt) 23 4 Orienting Insert (Horizontal Swing) 26 Angle Adjustable (vertical/horizontal) (HS9Z-A55S) 28.
HS1/HS5/HS6 Series Actuators Safety Products For HS1 Series Actuators See interlock switch pages or instruction manuals for selection and installation of actuators. Actuator APEM Part No. (Ordering Part No.
HS1/HS5/HS6 Series Actuators All dimensions in mm. Actuator Mounting Holes Actuator Cover (red) .2 R3 58 29.2 44 58 72 7.4 APEM Switches & Pilot Lights Actuator Cover (red) (Note) 5 R 20 4.1 2 3.2 2-M6 Screws 2 Door Hinge Actuator Mounting Holes Control Boxes Emergency Stop Switches Enabling Switches 20° Safety Products 2 ° 90 Angle Adjustment Screw (M3 hexagon socket head screw) 30 33 max. 12 (21) 1 2 18 Stopper Film (Note) 4.1 7.
HS1/HS5/HS6 Series Actuators Safety Products For HS6 Series Actuator See interlock switch pages or instruction manuals for selection and installation of actuators. Actuator APEM Part No. (Ordering Part No.
HS1/HS5/HS6 Series Actuators Straight Actuaor (HS9Z-A61) 20.9 All dimensions in mm. Angle Adjustmentable Actuator (HS9Z-A65) 3.5 1.2 .3 0.8 8.4 ø4 2- 15 The HS9Z-A65 and HS9Z-A66 have the metal key inserted in opposite directions. 0.8 Orienting Insert (15.8) 14 Angle Adjustmentable Actuator (HS9Z-A66) Horizontal Adjustment 43.2 Horizontal Adjustment 14 Angle Adjustment (M3 Hexagon Socket Head Screw) 13 28.2 7.
Safety Products APEM Switches & Pilot Lights Control Boxes Emergency Stop Switches Enabling Switches Safety Products HS5 Series Door Handle Actuator Easy and secure operation. • Rattling doors can be locked smoothly and securely. • A door can be locked with an actuator by pushing and turning the handle. • Padlock tab is provided to ensure operator safety. • Interlock switch with or without solenoid lock can be installed. • LED shows solenoid status (when using HS5E-L/HS5L-L).
HS5 Series Door Handle Actuator Safety Products Dimensions HS9Z-DH5RH (right-hand door) and HS5L-L Interlock Switch with Solenoid Rear Handle (diecast aluminum) (gunmetal color) Diecast Aluminum (plated) (silver) SUS Rear Button Connecting Rod ø10.4 (SUS) X Handle Link Shaft 8 (free-cutting steel) Description Right-hand Door Handle Unit HS9Z-DH5RH Switch Cover Unit HS9Z-DH5C Rear Unlocking Button Kit for Frame HS9Z-FL5 HS5L Interlock Switch Rear Unlocking Button Model HS5L-L APEM 35 52.5 49.
HS5 Series Door Handle Actuator HS9Z-DH5RH (right-hand door) and HS5E-K Interlock Switch with Key Rear Button Connecting Rod ø10.4 (SUS) Handle Link Shaft 8 (free-cutting steel) Diecast Aluminum (plated) (silver) Polyacetal (black) 49.8 46 Front Handle (diecast aluminum) (black) Mounting Panel Thickness 7 to 9 73 52 47.
HS5 Series Door Handle Actuator Safety Products Dimensions HS9Z-DH5RH (right-hand door) and HS5D-Z Interlock Switch Rear Handle (diecast aluminum) (gunmetal color) Diecast Aluminum (plated) (silver) Legend SUS Handle Link Shaft 8 (free-cutting steel) Description Left-hand Door Handle Unit HS9Z-DH5LH Switch Cover Unit HS9Z-DH5C HS5D Installation Kit HS9Z-DH5B Interlock Switch HS5D-Z 52.5 49.
HS5 Series Door Handle Actuator HS9Z-DH5RH right-hand door handle unit 36 to 46 7 to 9 47.5 6 to 16 When using the HS5E-KL and HS5L44LM-G on the mounting panel of 3 mm or less in thickness (use the rear unlocking button). (47.5) 13 to 20 8 to 20 26 Mounting Position Tolerance 204 256 0.8 2-M5 Rear Unlocking Button Hole ø22 to 30 (∗1) 6-M5 Rear Handle Hole ø26 to 30 (∗2) Door Gap Explosion Proof LED Illumination 7 to 9 47.5 (47.
HS5 Series Door Handle Actuator Safety Products Dimensions Rear Unlocking Button Kit (HS9Z-FL53/HS9Z-FL54/HS9Z-FL55) (Use with the HS5E-44L**-G/HS5L-44LM-G rear unlocking button model interlock switch) Rear Unlocking Button Kit Mounting Hole Layout M5 or Screws (ø5.2 or M5 tapped) 3.5 Unlocking Button Mouting Plate (SUS) 40 Use an exclusive screw for frame mounting Unlocking Button (PA66) Button unpressed 33 60.9 33 60.9 25.9 73 31.
HS5 Series Door Handle Actuator Safety Products APEM Switches & Pilot Lights Control Boxes Emergency Stop Switches Enabling Switches Safety Products Explosion Proof Terminal Blocks Relays & Sockets Circuit Protectors Power Supplies LED Illumination Controllers Operator Interfaces Sensors AUTO-ID Interlock Switches Non-contact Interlock Switches Safety Laser Scanners Safety Light Curtains Safety Modules HS6B HS6E Instructions • The door handle actuator can be used with the HS5D-Z (metal head), and HS5E-
HS5 Series Door Handle Actuator Safety Products Instructions 5. Install the switch cover unit on the mounting frame and panel. Mounting screws or nuts are not supplied and must be provided by the user. 7. Tighten Screw D attached to the handle using a hexagonal wrench (size: 2.5). Apply Loctite to the screw so that it does not become loose. Screw D APEM Mounting Screws Mounting holes required in the frame. See panel cut-out.
HS5 Series Door Handle Actuator Safety Products APEM Switches & Pilot Lights Control Boxes Emergency Stop Switches Enabling Switches Instructions Notes Ensure that the connecting rod is pulled out completely and it is horizontal to the interlock switch, otherwise the unlocking button cannot be installed. Frame or panel must be supplied by the user. Unlock B Unlocking Button Button Groove Circuit Protectors How to operate A Button Operating Pin Screw (M5) (2) 5.
Safety Products HS5 Series Slide Handle Actuator Shock-resistant metal slide handle actuators ensure safety • Metal guide is resistant against shocks. • 2-step sliding action prevents unintended closing of the door. • Rear lever can be used by an operator trapped inside the hazardous area for escape in case of emergency. • Padlockable bolt prevents unintended closing of the door. • Easy positioning with no need for angle adjustment when installing.
HS5 Series Slide Handle Actuator Legend Material: PA6 (black) Material: ST37 zinc coated APEM Safety Products Item HS9Z-EH5L Slide Handle Actuator Manual Rear Unlocking Button Kit for Frame (HS9Z-FL5, sold separately) (See the table below) HS5E Interlock Switch with Rear Unlocking Button (HS5E-44L**-G, sold separately) Part No.
HS5 Series Slide Handle Actuator Safety Products Operating Instructions • In order to avoid electric shock or fire, turn power off before installation, removal, wire connection, maintenance, or inspection of the interlock switch. • Do not disassemble or modify the interlock switch, otherwise a breakdown or an accident may occur. • The slide handle actuator can be used with the HS5D, HS5E-L, and HS5E-KL/HS5L-L only. Do not use with other interlock switches.
HS5 Series Slide Handle Actuator Safety Products APEM Operating Instructions When using HS5D Installing the Actuator 1. Using M4 mounting screws, fasten the HS5D interlock switch on the switch base unit. Mounting screws are not supplied and must be provided by the user. • Insert handle unit into switch base unit. • With actuator stop lightly touching the interlock switch, install actuator on the handle unit using spring washers and oneside screws.
HS5 Series Slide Handle Actuator Safety Products Operating Instructions Rear Unlocking Button Operation Locked Recommended Tightening Torque Unlocked 40 HS5E- L Interlock Switch (sold separately) Item HS5D (Two M4 screws) HS5E-L/HS5E-KL/HS5L-L (Four M4 screws) Switch base unit (Two M6 screws) Handle unit (Two M6 screws) Actuator (Two M5 one-side screws) Tightening Torque 1.8 to 2.2 N·m 4.5 to 5.5 N·m 4.5 to 5.5 N·m 2.7 to 3.
Safety Products APEM Switches & Pilot Lights HS5 Series Sliding Actuator Sliding actuators allow for easy installation and adjustment. • Angle adjustment is not required, enabling easy positioning. • Installation is possible both vertically and horizontally, and also on any type of doors. • Can be used on the HS5L, HS5D metal head and HS5E/HS5E-K interlock switches. • Safety measures can be provided easily on existing facilities.
HS5 Series Sliding Actuator Safety Products Installation 4 5 HS5L Interlock Switch Two Oblong Mounting Holes 34 Two Round Mounting Holes APEM 5 4 Fasten the actuator cover on at least two oblong holes using mounting screws. Switches & Pilot Lights 0 36.2 36.2 5 -1 HS5D Interlock Switch 86.
Safety Products APEM Switches & Pilot Lights Control Boxes Emergency Stop Switches Enabling Switches Safety Products Explosion Proof Terminal Blocks HS5 Series Plug Actuator Allows HS5 series interlock switches to be used as interlock plug units. • By chaining a plug actuator to a guard door for use with the HS5 series interlock switches, the open/close status of a guard door can be detected. • Unlike interlock plugs, the plug actuators can be removed/ installed while power is applied.
HS5 Series Plug Actuator Safety Products Precautions for Installation • When using the HS9Z-A5P for safety-related equipment in a control system, refer to the safety standards and regulations in each country to make sure of correct operation. Also, perform a risk assessment to ensure safety before starting operation. • Read the instruction sheet of the interlock switch to be used. • Note the projections on the HS9Z-A5P to prevent injury. • Regardless of door types, do not use the HS9Z-A5P as a door lock.
Safety Products APEM Switches & Pilot Lights Control Boxes Emergency Stop Switches Enabling Switches HS5 Series Padlock Hasp Padlock hasps prevent unauthorized insertion of actuators. • Ideal to prevent machines from operating when two or more operators are inside the danger zone. • Accommodates up to four padlocks when the hasp is installed on the interlock switch.
HS5 Series Padlock Hasp Safety Products Precautions for Installation • When using the HS9Z-PH5 for safety-related equipment in a control system, refer to the safety standards and regulations in each country to make sure of correct operation. Also, perform a risk assessment to ensure safety before starting operation. • Read the instruction sheet of the interlock switch to be used. • Note the projections on the HS9Z-PH5 when using to prevent injury.
