Datasheet

For more information, visit http://asia.idec.com
E-065
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Safety Products
Interlock
Switches
Non-contact
Interlock Switches
Safety Laser
Scanners
Safety Light
Curtains
Safety Modules
HS6B
HS6E
HS5D
HS5L
HS1L
Actuators for
HS1/HS5/HS6
Actuators/
Padlock Hasp
HS1/HS5/HS6 Series Actuators
Dimensions (HS5 Series) All dimensions in mm.
Straight (HS9Z-A51)
Note: Actuator Stop
(supplied with the actuator)
26 15
32.4
28 20
4-R 2.
2
10
0.85.2
(6)
6.2
6.4
2
2-M4 Screw
20
Actuator Mounting Hole Layout
(Straight, Right-angle)
Straight with Rubber Bushings (HS9Z-A51A)
30
7.3 43.8
15.3
15
2-ø4.3
2
12
0.8
(20)
0.8
2-ø10
2-ø9
When
mounted (5)
Washer (supplied)
Rubber Bushing
Note: Actuator Stop
(supplied with
the actuator)
*
The mounting center distance is set to 12 mm
at the factory. When a 20mm distance is
required, adjust the distance by moving the
rubber bushing sideways.
*
The actuator has flexibility to the direction
indicated by the arrows.
*
Mounting centers can be widened to 20mm by
moving the Rubber Bushings.
*
Mounting centers must be 12 or 20mm.
Vertical
Swing
Actuator Mounting Hole Layout
(Straight with Rubber Bushings)
(Right-angle with Rubber Bushings)
12
2-M4 Screw
Right-angle (HS9Z-A52) Right-angle with Rubber Bushings (HS9Z-A52A)
15
2
2-ø4.4
20
33
29.6
28
0.84.5
27
.27.2
1.6
Note: Actuator Stop
(supplied with the actuator)
Actuator Cover
Vertical
Swing
Horizontal
Swing
*
When the mounting center distance is set
to 12mm at the factory, the actuator has
flexibility both vertically and horizontally.
*
When the mounting center distance is set
to 20mm, the actuator swings vertically.
Adjust the distance by moving the rubber
bushings.
30 15
15.8
8.5
0.8
2
0.8
(11.2)
When mounted (39.7)
When
mounted
When
mounted
(5)
2-ø9
2-ø10
2-ø4.3
12
(20)
Note: Actuator Stop
(supplied with the actuator)
Rubber Bushing
Washer (supplied)
*
Mounting centers must be 12 or 20mm.
20
5
R3.2
72 58
44
33 max.
12
(21)
1
20°
29
58
2-M6
Screw
18
Actuator Mounting
Hole Layout
(Angle Adjustable [vertical])
Angle Adjustment
(M3 hexagon socket head bolt)
Door Hinge
Side
Note: Actuator Stop Film
(supplied with the actuator)
(M4 Hole)
R2.1
20°
20°
Note: Actuator Stop Film
(supplied with the actuator)
Angle Adjustment
(M3 hexagon socket head bolt)
Angle Adjustment
(M3 hexagon socket head bolt)
(Horizontal Swing)
(Vertical Swing)
Orienting
Insert
Orienting
Insert
48.4
14.4
7
18.5
28.5
3
3.6
1
23
26
38
Note: Actuator Stop Film
(supplied with the actuator)
0.8
2
382-M4 Screw
Actuator Mounting Hole Layout
(Angle Adjustable)
(vertical/horizontal)
Note: The actuator stop lm and actuator stop are supplied with the actuator
and used when adjusting the actuator position. Remove after the actuator
position is determined.
Angle Adjustable (vertical) (HS9Z-A53) Angle Adjustable (vertical/horizontal) (HS9Z-A55)
For more information, visit http://eu.idec.com