Datasheet

For more information, visit http://asia.idec.com
E-069
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Safety Products
Interlock
Switches
Non-contact
Interlock Switches
Safety Laser
Scanners
Safety Light
Curtains
Safety Modules
HS6B
HS6E
HS5D
HS5L
HS1L
Actuators for
HS1/HS5/HS6
Actuators/
Padlock Hasp
HS1/HS5/HS6 Series Actuators
For HS6 Series
Actuator
See interlock switch pages or instruction manuals for selection and installation of actuators.
Package Quantity: 1
Actuator
Part No.
(Ordering Part No.)
Applicable Model Remarks
Straight Actuator
HS9Z-A61
HS6B Interlock Switches
HS6E Interlock Switches with Solenoid
•When used on HS6E:
Actuator retention force is Fzh=500N
Right-angle Actuator
HS9Z-A62
•When used on HS6E:
Actuator retention force is 100N. Do no apply
excessive load, otherwise the actuator may fall off
the door.
When retention force of 100N or more is required, use
the HS9Z-A62S actuator.
Right-angle Actuator with Mounting
Plate
HS9Z-A62S HS6E Interlock Switches with Solenoid
•When used on HS6E:
Actuator retention force is Fzh=500N
Angle Adjustable (horizontal/ vertical)
Actuator (*1)
HS9Z-A65
HS9Z-A66
HS9Z-A65
HS6B Interlock Switches
HS6E Interlock Switches with Solenoid
HS9Z-A66
•When used on HS6E:
Actuator retention force is Fzh=500N
•HS9Z-A65 and HS9Z-A66 have the metal key installed
in opposite directions.
*1) Select actuator by determining the required moving direction in consideration of the door and interlock switch.
For more information, visit http://eu.idec.com