Datasheet

For more information, visit http://asia.idec.com
E-071
HS5 Series Door Handle Actuator
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Safety Products
Interlock
Switches
Non-contact
Interlock Switches
Safety Laser
Scanners
Safety Light
Curtains
Safety Modules
HS6B
HS6E
HS5D
HS5L
HS1L
Actuators for
HS1/HS5/HS6
Actuators/
Padlock Hasp
Easy and secure operation.
• Rattling doors can be locked smoothly and securely.
• A door can be locked with an actuator by pushing and turning the handle.
• Padlock tab is provided to ensure operator safety.
• Interlock switch with or without solenoid lock can be installed.
• LED shows solenoid status
(when using HS5E-L/HS5L-L).
Specifications
Applicable Interlock
Switch (*1)
Without lock
• HS5D Interlock Switch
With lock
• HS5L Interlock Switch with Solenoid
• HS5E-K Interlock Switch with Key
• HS5E Interlock Switch with Solenoid
Operating Temperature –25 to +70°C (no freezing)
Mechanical Durability 100,000 operations minimum
Applicable Shackle
Diameter of Padlock
ø6 to 7.5 mm
Withstand Load of
Padlock Tab
30N maximum
Handle Operation Angle 77° (removed position ↔ inserted position)
Weight
HS9Z-DH5LH/RH: 1000g
HS9Z-DH5C: 900g
HS9Z-DH5B: 30g
*1) Use rear unlocking model for HS5L/HS5E-K/HS5E.
• Interlock switch is not supplied with the actuator and must be ordered separately.
• See website for HS5D/HS5E/HS5L specications.
Description Part No. Remarks
Handle Unit
For right-hand door HS9Z-DH5RH
Choose according to the required opening side.
For left-hand door HS9Z-DH5LH
Switch Cover Unit HS9Z-DH5C Used for installing the interlock switch inside.
HS5D Installation Kit HS9Z-DH5B Contains a mounting plate and two spacers.
Rear Unlocking Button Kit (*2)
HS9Z-FL53
Contains a button with base
plate and a connecting rod
Mounting panel thickness (X): 20 ≤ X ≤ 30 mm (Note 2)
HS9Z-FL54 Mounting panel thickness (X): 30 < X ≤ 40 mm (Note 2)
HS9Z-FL55 Mounting panel thickness (X): 40 < X ≤ 50 mm (Note 2)
*2) Use the kit in combination with HS5E-L rear unlocking button type (sold separately) or HS5L-L rear locking button type (sold separately).
• Mounting panel is a frame or a panel.
Parts Description
Rear Handle
(gunmetal color)
Rear Unlocking
Button Kit
Rear Unlocking
Button
Padlock Knob
Blind Cap
Handle Unit
(for right-hand door)
Manual Unlock
Label
Interlock Switch
Front Handle (black)
Switch Cover Unit
Front View Rear View
For more information, visit http://eu.idec.com