HS5D Miniature Interlock Switches Head Removal Detection Function for Safer Performance
New Generation Miniature Interlock Switches IDEC’s new unique “Head Removal Detection Function” is a new generation technology that assures safety and satisfies international safety standards. Head Removal Detection Function All HS5D models are equipped with “Head Removal Detection Function.” When the head is removed, such as when the head is rotated, the main circuit (11-12) turns OFF.
HS5D Miniature Interlock Switches Head removal detection for safer performance. • Head removal detection function turns OFF the main circuit (11-12) when the head of the HS5D is removed. • 3 contact types with dual enabling contacts and a monitor contact are available. Can be installed in narrow spaces. (30W × 30D × 91H mm) • The actuator is interchangeable with HS5E and HS5L. • Double insulation structure eliminates the need for grounding.
HS5D Miniature Interlock Switches Miniature Safety Interlock Switch Contact Configuration 1NC-1NO Zb 11 Main Circuit Monitor Circuit 23 11 Main Circuit 12 Zb 21 Monitor Circuit Main Circuit Main Circuit Monitor Circuit G1/2 PG13.5 M20 G1/2 PG13.5 M20 G1/2 PG13.5 M20 G1/2 PG13.5 M20 24 2NC 2NC-1NO Gland Port Size 11 21 33 3NC 11 21 31 Main Circuit Main Circuit Monitor Circuit 12 22 Zb 12 22 34 Zb 12 22 32 Package Quantity: 1 Part No.
HS5D Miniature Interlock Switches Dimensions and Mounting Hole Layouts HS5D-ZRN (Metal Head) With HS9Z-A51 Straight Actuator RP: Reference mounting position 36 5.2 26.4 6.2 36.2 Actuator Actuator Stop 91 20 30 20 28 20 30 1 28 20 Actuator Actuator Stop Gland Port 1 Gland Port Plastic (red) Plastic (gray) R2 .2 42.2 5.2 RP 1 26.4 6.2 Metal Head Cover Plastic (red) Plastic (gray) R2 .2 RP 1 Metal Head Cover 36.
HS5D Miniature Interlock Switches Actuator Dimensions 10 2 2 Actuator Stop (Note) Ⓑ 20 2-M4 Screw Angle Adjustable (HS9Z-A55) Angle Adjustment (M3 Hexagon Socket Head Screw) 3 20º 48.4 7 18.5 14.4 1 29 (M4 R2.1 Hole s) 3.6 Vertical Swing Orienting Insert Actuator Stop (Note) 0.8 12∗ (20) .3 Actuator Stop (Note) * The mounting center distance is set to 12 mm at factory. When 20mm distance is required, adjust the distance by moving the rubber bushings.
HS5D Miniature Interlock Switches Operating Instructions Minimum Radius of Hinged Door • When using the interlock switch for a hinged door, refer to the minimum radius of doors shown below. For the doors with small minimum radius, use angle adjustable actuators (HS9Z-A55). Note: Because deviation or dislocation of hinged door may occur in actual applications, make sure of the correct operation before installation.
HS5D Miniature Interlock Switches Operating Instructions Rotating the Head Applicable Crimping Terminal • The head of the HS5D can be rotated by removing the four screws from the corners of the HS5D head and reinstalling the head in the desired orientation. When reinstalling the head, make sure that no foreign object enters the interlock switch. Tighten the screws tightly, because loose tightening may cause malfunction. • Recommended screw tightening torque: 0.6 to 1.
