Datasheet

3
LF1D LED Illumination Units
Types
Type LED Arrangement Lens Accessories Ordering Type No. Cable Length Package Quantity
Slim 10 LEDs × 1 row
Reinforced glass
Cable gland, mounting
bracket, cable
LF1D-E2F-2W-A
5m
1
Polycarbonate LF1D-E3G-2W-A
Reinforced glass
—
LF1D-E2F-2W
—
Polycarbonate LF1D-E3G-2W
Wide 7 LEDs × 2 rows
Reinforced glass
Cable gland, mounting
bracket, cable
LF1D-F2F-2W-A
5m
Polycarbonate LF1D-F3G-2W-A
Reinforced glass
—
LF1D-F2F-2W
—
Polycarbonate LF1D-F3G-2W
Contact IDEC for other combination of accessories.•
Rear cable lead-in type is available. Contact IDEC for details. •
Accessories
Type Material Ordering Type No. Remarks Package Quantity
Cable Gland Brass LF9Z-A11 M8, applicable wire size: ø3.5 to 5.5 mm (10 to 12AWG) 1
Mounting Bracket
For Slim Type
Stainless steel
LF9Z-B11 With mounting screws 2
For Wide Type LF9Z-B12 With mounting screws 2
Cable PVC LF9Z-C05 Length: 5m 1
Specifications
General Specifications •
Type Slim Wide
Rated Voltage 24V DC
Voltage Range 21.6 to 26.4V DC
Rated Power (typ.) 9W 12.5W
Insulation Resistance 1 MΩ minimum (500V DC megger)
Dielectric Strength 1000V AC, 50/60 Hz, 1 minute
Vibration Resistance
(damage limits)
Frequency 5 to 55 Hz, amplitude 0.5 mm
Shock Resistance
(damage limits)
1000 m/s
2
Operating Temperature –30 to +55°C (no freezing)
Operating Humidity 45 to 85% RH (no condensation)
Storage Temperature –35 to +70°C (no freezing)
Operating Atmosphere No corrosive gas
Life (Note 1)
50,000 hours (The illumination duration in which
the illuminance maintains a minimum of 70% of
the initial value at 25°C.)
Degree of Protection
(Note 2)
Reinforced glass lens: IP67f
Polycarbonate lens: IP67
Material
Housing: Diecast aluminum
Front cover: Stainless steel
Lens: Reinforced glass or polycarbonate
(Note 3)
Weight (approx.)
LF1D-E
∗∗
-2W: 750g
LF1D-E
∗∗
-2W-A: 950g
LF1D-F
∗∗
-2W: 800g
LF1D-F
∗∗
-2W-A: 1000g
Note 1: LED life depends on the operating environment.
Note 2: Waterproof and oil-proof characteristics guaranteed for condi-
tions specied by IEC 60529 and JEM1030. For illumination
units without accessories, use a cable gland and cable that
satisfy IP67f or IP67 degrees of protection.
Note 3: The reinforced glass and polycarbonate lenses have the same
appearance, but have different degrees of protection (IP67f or
IP67).
LED Optical Specifications •
Type Slim Wide
Illumination Color White
Total Luminous Flux (typ.) 600 lm 840 lm
Color Temperature (typ.) 5700K
Reference Illuminance (typ.) at 1.0m 1100 lx
LED modules and illumination units may vary in illumination colors and •
illuminance. Luminous ux, color temperature, and illuminance shown
in the above are typical values.
Illuminance Distribution (at 1.0m)
Slim Type •
•
Wide Type
-400
-200
0
200
400
-400 -200 0 200 400
X (mm)
Y (mm)
1000 lx
800 lx
600 lx
400 lx
200 lx
1000 lx
800 lx
600 lx
400 lx
200 lx
-400
-200
0
200
400
-400 -200 0 200 400
X (mm)
Y (mm)
X: Long side
Y: Short side
Terminal Block Wiring
Slim Type •
•
Wide Type
(+) (brown)
(–) (blue)
(+) (brown)
(–) (blue)
Applicable ferrules: 0.25 to 0.75 mm
2
Recommended source:
Phoenix Contact: AI 0,25-12 BU, AI 0,34-12 TQ,
AI 0,5-12 WH, AI 0,75-12 GY
Internal Circuit
(–)
(+)
Constant-current
power supply
+
LED
Housing