SA1E-L Miniature Photoelectric Switches (Built-in Amplifier) Laser Visible red laser beam and fast response speed. High precision sensing.
(12/04/19)
(12/04/19)
SA1E-L Miniature Laser Photoelectric Switches (Built-in Amplifier) Class 1 laser. Fastest response in its class. Reliably detects fast-moving objects. • Light source is a red laser (Class 1 by IEC60825-1, 2007). • Laser beams with high degree of straightness achieve a long sensing range (30 m maximum). • Response speed of 250 μs is the fastest in its class. Reliably detects fastmoving small objects. • The visible beam ensures easy and reliable positioning.
SA1E-L Miniature Laser Photoelectric Switches (Built-in Amplifier) Accessories (optional) Sensitivity Control Screwdriver Sensor Mounting Brackets Item Sensor Mounting Brackets Part No. Vertical Mounting SA9Z-K01 Horizontal Mounting SA9Z-K02 Cover Type SA9Z-K03 Package Quantity Item Part No. Package Quantity SA9Z-AD01 1 Sensitivity Control Screwdriver 1 Back Mounting SA9Z-K04 ••See page 8 for dimensions.
SA1E-L Miniature Laser Photoelectric Switches (Built-in Amplifier) Specifications Through-beam Polarized Retroreflective Background Suppression (BGS) SA1E-LT SA1E-LP 12 to 24V DC (Operating range: 10 to 30V DC) Equipped with reverse-polarity protection Projector: 15 mA maximum 35 mA maximum Receiver: 30 mA maximum Part No. Power Voltage Current Draw Sensing Range 30m SA1E-LB 20 to 300 mm (using 100 × 100 mm white matte paper) 40 to 300 mm ø0.2 mm minimum (copper wire) (at 170 mm) 0.
SA1E-L Miniature Laser Photoelectric Switches (Built-in Amplifier) Dimensions 15.3 11.8 8.2 Operation LED (yellow) (Note 2) Operation Mode Switch (Note 1) 10.8 3.2 Cable Model Operation LED (green) (Note 1) ••Polarized Retroreflective ••Background Suppression (BGS) Sensitivity Control (except BGS) (Note 1) Sensing Range Control (BGS) 19.5 1.2 ••Through-beam Projector or Receiver 25.4 31.5 8.0 7.2 17.1 19.8 Receiver (Polarized Retroreflective) ø3 .5 (Note 3) Projector 2-M3 3.4 7.
SA1E-L Miniature Laser Photoelectric Switches (Built-in Amplifier) Dimensions Mounting Brackets 0.5 21.5 6.0 3.4 10.8 13.7 3.2 8.0 25.4 1.2 (Note 1) (Note 3) 7.2 (Note 2) 9.3 12.3 25.0 12.3 42.5 13.7 (3.2) 7° 21.5 17.1 25.4 42.5 14° 14.0 With Mounting Bracket 3.4 19.5 3.0 31.5 9.0 24.8 13.4 4.5 8.0 SA9Z-K01 1.
SA1E-L Miniature Laser Photoelectric Switches (Built-in Amplifier) SA9Z-K04 28.4 With Mounting Bracket 30 25 14 8 24.8 7 t=1.2 3.2 19.5 13.4 10.8 25.4 7 24 32 7 3.4 5 1.6 Material: Stainless Steel Reflector IAC-R5 IAC-R8 2-ø4.3 61 30.4 72 60 51.2 51.2 30 40 3 9 51 2-ø4.5 8 (Reflecting surface: 47 × 47) (Reflecting surface: 47.2 × 47.2) 5 4.4 61.6 51 IAC-R9 2-R 2.2 20 40 51.6 2-R 2.2 3.5 6.1 All dimensions in mm. (Reflecting surface 47 × 47.
SA1E-L Miniature Laser Photoelectric Switches (Built-in Amplifier) Dimensions Reflector Mounting Brackets IAC-L2 (for IAC-R5) IAC-L3 (for IAC-R9) IAC-L5 (for IAC-R8) 19 6 25 4.5 4.5 10 11 37 2-ø3.4 74 60 40 10 4-ø4.4 11 30 (3) 5.5 28 42 50 40 Material: SPCC (zinc plating) 61 15 (2) 7 12 18 35 20 8-M3 × 0.5 holes 2 58 20 26 (3) 1.6 44 6 8 10 16 70 16 113 35 25 (28) Material: SPCC (zinc plating) 8-M3 × 0.
SA1E-L Miniature Laser Photoelectric Switches (Built-in Amplifier) Characteristics (Typical) 1. Through-beam SA1E-LT Excess Gain (without slit) Excess Gain (with round slit) 10 20 30 40 50 Sensing Distance (m) Angle (without slit) ø2.0 mm Slit on receiver ø1.0 mm Slit on receiver 10 ø0.
SA1E-L Miniature Laser Photoelectric Switches (Built-in Amplifier) Characteristics (Typical) 3.
SA1E-L Miniature Laser Photoelectric Switches (Built-in Amplifier) Instructions Indicator and Output Operation (Through-beam/Polarized Retroreflective) Operation LED (yellow) Operation Mode Switch Sensitivity Adjustment (Through-beam/Polarized Retroreflective) ••Referring to the table below, adjust the sensitivity of the SA1EL photoelectric switch when necessary, in such cases as the through-beam is used to detect small or translucent objects.
SA1E-L Miniature Laser Photoelectric Switches (Built-in Amplifier) Power Supply and Wiring Installation ••Do not use the SA1E-L photoelectric switch in the transient status immediately after turning on the power (approx. 100 ms). When the load and switch use different power supplies, make sure to power up the switch first.
SA1E-L Miniature Laser Photoelectric Switches (Built-in Amplifier) Installing the air blower mounting block SA9Z-A02 ••When installing the SA9Z-A02 on the SA1E-L photoelectric switch, use the attached M3 mounting screws and tighten to a torque of 0.4 to 0.5 N·m maximum. ••Mounting bracket is not supplied with SA9Z-A02 and must be ordered separately. SA9Z-K01 mounting bracket can be used with SA9Z-A02.
SA1E-L Miniature Laser Photoelectric Switches (Built-in Amplifier) SA1E Miniature LED Photoelectric Switches (Built-in Amplifier) Easy Installation Seven sensing methods available. IP67 Cable Model Connector Model 19.5 19.5 10.8 Reflectors 10.8 31.5 31.5 10.8 Photo: Through-beam Photo: Polarized retroreflective ••For detecting transparent objects All dimensions in mm. Part No.