Operation Manual

Handset Power To turn the Handset power to Off:
On/Off Press and hold POWER button for 3 seconds.
Ö The LCD screen will turn blank.
To turn the Handset power to On:
1 Press POWER button.
Ö The LCD screen shows, then
2 Place the Handset face up on the Base unit
charge cradle.
1 In Standby mode, press and hold
Ö The LCD screen display and
the icon turns on. The ring volume will
be set to VOLUME 0.
2 To restore the ring function, press and hold RINGER
button again for 3 seconds.
Ö
he icon
turns off.
Keypad lock
When the keypad is locked, no can be
pressed so you can’t make calls by mistake. While keypad
is locked, the phone is still able to make
an emergency call and answering an incoming call.
1
Press and hold KEY LOCK button for 3 secs.,
the icon will turn on.
2
This feature is useful if you don’t remember where
you put your Handset(s).
1 Press PAGE button on the Base unit.
Ö The Handset(s) registered to the Base unit emits
a paging tone for 60 seconds. The LCD screen will
show,
2
Press any button on the Handset or press PAGE
button on the Base unit to terminate the paging call.
Basic Telephone operation continue...
Ring On/Off
shortcut
feature
Paging the
Handset(s)
iDECT X2i
er
INITIALIZE
RING OFF
ON/OFF
3
return the standby display.
button for 3 seconds.
RINGER󰚟ON/OFF
s
T
buttonnumeric
To unlock
Press any button, soft button shows
UNLOCK
Press soft button
UNLOCK
Ö The display shows
PRESS*
Press button
UNLOCK
Ö
icon turns off.
PAGING
4
7