Operation Manual

1
Customizing your Phone continue...
You can set the alarm melody ringer under MELODY
sub-menu. When activated, the Handset will ring
for 30 seconds.
To stop the alarm, press
any button on the Handset.
Note: Once activated, the alarm will only ring
once. You must repeat setting the alarm if you
want to be alerted on the following day.
1
2 P
3
4
5
Note: When dialing in Pulse mode, press */RING
button once to temporarily switch to the tone mode
dialing. It will return to the pulse mode once the
Handset goes on hook (Temporary tone dialing feature).
1
2
Dial mode
setting
Flash time
setting
Press button
soft to confirm
Ö
display shows by default.
5
6
7
ON
HOUR 12AM
Key in digits from 01 to 12
Toggle UP/DOWN key to select or
AM
PM
Press button
soft
to confirm
Ö
display shows by default.
8
OK
MINUTE
00
Key in digits from 0 to
9
0 59
Press button
soft
to confirm
OK
10
the
se
tti
ng
.
Press button
soft
Ö
display shows
Menu
HANDSET
highlighted
ress
Down button until
option is highlighted
BASE
Press button
soft
Select
Ö
display shows
highlighted
DIAL MODE
Press button
soft
to confirm
Select
Ö
display shows
highlighted
TONE
Press button
soft
to confirm
Select
the setting.
Repeat the steps above for Pulse mode setting.
6
Press button
soft
Ö
display shows
Menu
HANDSET
highlighted
P
ress
Down button until
option is highlighted
BASE
Alarm setting
This feature allows you to set an alarm time for your Handset.
1
2
3
Press DOWN button
4
Press button
soft
Menu
to access handset menu
Press soft
button
Select
Ö
display shows
MELODY
highlighted.
until is highlighted
ALARM
Press soft
button
Select
Ö
display shows
ON
by default, or toggle to show
OFF
5