Operation Manual

18
Notes:
Ö If there are no memory locations left in the
Phonebook, the LCD screen will display
To continue with memory programming, you must
delete or edit existing Phonebook records.
Ö If you mis-type entering the name or phone
number, press
button to delete all the name or number
Some internal switchboards may require you to dial
a number to get an outside line. It may take a few
seconds to connect, requiring a pause in the
dialing sequence.
In the number entry mode, press and hold PAUSE
button for 3 seconds to make a pause.
Ö It will be displayed as P on the LCD screen.
Note: The default pause time is 3 seconds.
1
2
3
4
5
6
7
8
9
Phonebook function continue...
Storing a pause
in a number
To edit a
Phonebook
record
soft button to delete the
DELETE
last character or digit entry. Press and hold soft
DELETE
entry
.
Press button
soft
Ö
display shows highlighted
Name
EMERGENCY
Press DOWN button
until
option is highlighted.
EDIT
Press button
soft
Ö
Select
The phonebook entry will be displayed in
alphanumeric order(or the display will show
EMPTY
if there is no record stored).
Press UP or DOWN button to search for the entry
which you wish to edit.
Press button
soft
Ö
display shows name entry.
OK
Press soft button to delete unwanted
DELETE
characters then key in desired characters via keyboard.
Press button
soft
Ö
display shows number entry.
OK
Repeat step to edit the number.
Press button
soft
OK
to confirm.
MEM FULL
6