Operation Manual

Answering Machine system continue...
Note: If the memory is full, the answer mode will
automatically change from ANS &
It will resume to
mode after deleting
some recorded message(s).
You can select the number of rings before the
system answers a call.
1 Press soft button
2 Press soft button
3 Press DOWN button until
4 Press soft button
5 Press DOWN button until
6
Press soft button Select to
7 Press UP or DOWN button to select ,
2, 3, 4, 5, 6, 7, 8 or 9 rings.
Ö Use ‘
, the answering machine
r
esponds after the 2nd ring only if you have a new
message. If there is no new message.
T
he phone will answer after the 4th ring.
8 Press soft button Select
Selecting the
number of
rings
The REMOTE PIN is a three-digit code you need if
you call away from home to check your messages.
The default is 123, you can change it to any three
digits you want.
1 Press soft button
Changing the
Remote PIN
code
X2i
to confirm your selection.
Menu
Ö
display shows highlighted
Ö
display shows highlighted
Ö
display shows
confirm
display shows highlighted
Ö
2 Press soft button
Ö
display shows highlighted
3 Press DOWN button until
4
Press soft button
Ö
display shows
to ANS ONLY
TAD
Select
ACCESS TAD
is highlighted.
Select
TAD ON/OFF
ANS DELAY
is highlighted.
TOLL SAVE
TOLL SAVE
Menu
TAD
Select
ACCESS TAD
TAD
option is highlighted.
Select
TAD ON/OFF
REC
ANS &
REC
SET TAD
option
SET
29