Operation Manual

Make sure to hold the earpiece correctly over your ear.
Adjust the volume as described in Section 5.
You need to subscribe to Caller Display from your service
provider. Contact the service provider for details of how to
subscribe.
The caller may have withheld his number.
Or he may be calling from a network that does not trans-
mit the Caller Display (ex., it may be an international call).
Check if your Handset is linked with the Base unit. If not,
you need to re-register the Handset.
If the display says
power lead is plugged into the back of the Base unit,
and
the adapter is plugged into the mains socket with the
power switched on.
Intercom and transfer
Make sure the other Handset is within range from the
Base unit.
Make sure you are keying in the correct number (1 to 4)
for the other Handset.
Batteries
Before initial use, charge the batteries up to 15 hours.
You may need to replace the batteries.
Clean the battery charging contacts with a dry cloth.
Check the connections between the base unit and the
mains power socket.
Troubleshooting continue...
“The volume in the
earpiece is low.”
“The Caller Display
feature isn’t
working.”
“I can’t transfer a
call.”
“The batteries are
running low within
an hour or two.”
“The CHARGE light
on the Base unit does
not come on.“
36
BS SEARCH
, make sure the mains