User Manual

MorphoAccess® Sigma Series - Installation Guide
Section 2 :
General Description
22
MORPHO DOCUMENT – REPRODUCTION AND DISCLOSURE FORBIDDEN
SSE-00000XXXXX-01
September 2013
MorphoAccess® Sigma Series Technical
Characteristics
Item
Description
Access control modes
Identification (search for fingerprint in a local database)
Authentication with contactless card, with or without
fingerprint check (only if terminal equipped with a
smartcard reader)
Multi-factor: identification or authentication (only if
equipped with a smartcard reader)
Proxy: the access control check is fully driven by a remote
system
Man Machine Interface
5” WVGA color Touch-screen
VGA camera
Loudspeaker & Microphone
Biometrics
Morpho Compact Biometric Module inside:
500dpi, 256 gray levels optical sensor.
FBI PIV IQS certified sensor.
False Acceptance Rate (FAR) adjustable from 10-2 down to
10-8
Database capacity: 3,000 users (standard) and up to 100
000 users (with specific license).
Log capacity
100 000 records (standard) and up to 1 000 000 (with
specific license)
LAN/WLAN connection
For terminal configuration and data transfer:
Ethernet 10/100 Base T
Or Wi-Fi™ Wireless LAN (option), WEP and WPA encryption
available
Either TCP, SSL or TLS protocol
RFID cards (depending on
product version)
MIFARE® 4k
DESFire® 2k, 4k, 8k
Serial port
The serial port supports WIEGAND, DATACLOCK ISO2,
RS422 and RS485 protocols
Output relay switches
Access granted: 1 switch (either "open" or "close" in