User Manual

MorphoAccess® Sigma Series – Installation Guide
Section 3 :
Installation Procedure
SSE-00000XXXXX-01
MORPHO DOCUMENT – REPRODUCTION AND DISCLOSURE FORBIDDEN
29
September 2013
Drilling the mounting holes
Figure 8: Drilling template
If not present, drill in the wall a hole with a diameter of 67mm (see Figure 8: Drilling
template. This template can be found in the Quick Installation Guide).
Confirm the presence inside the hole of all the cables needed for the electrical
installation (see Electrical Interface)
Drill in the wall 4 holes with a diameter adapted to screws and fit them with the raw
plugs (see Figure 8: Drilling template).
88.00
78.00
21.00 59.00
10.50
53.00