User Manual

MorphoAccess® Sigma Series - Installation Guide
Section 3 :
Installation Procedure
30
MORPHO DOCUMENT – REPRODUCTION AND DISCLOSURE FORBIDDEN
SSE-00000XXXXX-01
September 2013
Preparing wall plate
Figure 9: Wall plate preparation for water tightness
Create a silicone bead all along the notch. The silicone bead shall be reduced to avoid
overflow on the upper part of the wall plate (risk to prevent product mounting).
Fixing
Figure 10: Wall plate fixing
Place the wall plate against the wall, opposite the two holes pierced in the wall (see
Figure 10: Wall plate fixing).
Silicone
IP65
Silicone