User Manual

MorphoAccess® Sigma Series – Installation Guide
Section 4 :
Electrical Interface
SSE-00000XXXXX-01
MORPHO DOCUMENT – REPRODUCTION AND DISCLOSURE FORBIDDEN
45
September 2013
Wifi / 3G dongle installation
Wifi / 3G dongle shall be installed outside the product (separate area shall be
reserved in the wall) and connected to the internal USB Mini B using Morpho cable
ref XXX.
Wifi / 3G dongle shall not be exposed to temperature exceeding 50°C (don’t forget
thermal dissipation)
WI-FI™ and 3G features shall be available only if the product is powered from an
external AC/DC 12V to 24V power supply (no enough power from the POE output for
Wifi or 3G)
Only WI-FI or 3G USB dongle delivered by Morpho (Reference XXXXXXXX or
XXXXXXXX) may be installed with the terminal for WLAN (Wireless Local Area
Network) operation.
Cable has to be plugged on the upward USB connector, as on the following image:
USB extension cord (Reference XXXXXXXXX is necessary)
Figure 25: WI-FI™ / 3G dongle installation
Figure 26: WiFi / 3G USB cable connection
WI-FI™ or
3G USB
dongle (to
be installed
outside the
product
USB
extension
cord