User's Manual

MorphoAccess® SIGMA Extreme Series - Installation Guide
Section 2 : General Description
Identity & Security
2017_2000024418 - Draft
V0
January 2017
This document and the information therein are the property of Safran Identity & Security.
They must not be copied or communicated to a third party without the prior written authorization of Safran
25
MorphoAccess® SIGMA Extreme Series Technical
Characteristics
Item
Description
Access control modes
Identification (search for fingerprint in a local database)
Authentication with contactless smartcard, with or without
fingerprint check (only if terminal is equipped with a contactless
smartcard reader)
Multi-factor: identification or authentication (only if terminal is
equipped with a contactless smartcard reader)
Proxy: the access control check is fully driven by a remote system
Man Machine Interface
5” WVGA color capacitive Touchscreen
VGA camera for face image capture and videophone
Powerful Loudspeaker & Microphone
tBiometrics
MorphoSmart Optic Biometric Module inside:
23*23mm
500dpi, 256 gray levels optical sensor
FBI PIV IQS quality sensor
False Acceptance Rate (FAR) adjustable from 1% down to 10-7%
Database capacity: 5,000 users (standard) and up to 100 000 users
(with specific license)
Log capacity
1 000 000
100 000 if face picture logged
LAN/WLAN connection
For terminal configuration and data transfer:
Ethernet 10/100 Base T (MDI, MDI-X)
Or Wi-Fi™ Wireless LAN (option), WEP, WPA (PSK) and WPA2 (PSK)
encryption available
Either TCP, SSL or TLS protocol
RFID cards (depending on
product version)
MIFARE Classic 1KB & 4KB (4b and 7b UID)
MIFARE Plus SL1 cards
DESFire 3DES legacy 2K, 4K and 8K (EV0 & EV1)
DESFire AES 2k, 4k, 8k (EV1)
All HID iClass cards (incl. iClass legacy, iClass SR and iClass SE), except
2K2
HID Prox 125 kHz whatever the format (26, 37 ....)
Serial port
The serial port supports WIEGAND, DATACLOCK (ISO2), RS422 and
RS485 protocols
GPIO
3 GPI, 3 GPO