Installation Guide

MorphoAccess® VP MD – Installation Guide
Section 2 :General Description
2019_200000XXXX-V0
IDEMIA DOCUMENT - REPRODUCTION AND DISCLOSURE PROHIBITED
23
December 2018
Components of the initial package
Figure 3: Box Content
1. One (1) Terminal’s body
2. One (1) top cover fixed at the body of the terminal
3. One (1) bottom cover
4. Four (4) M3X10 Screws (for terminal fixing to the wall plate) – T10 Torx and 4mm
flat print
5. Four (4) K25x8 Screws (Bottom cover fixing) – T8 Torx Print
6. One (1) Connection cable
7. One (1) Wall frame
( X4)
K25-8
Torx 8 Print
( X4)
M3-10
Torx 10 Print
1
2
3
4
6
5
7