Installation Guide

MorphoAccess® VP MD – Installation Guide
Section 2 :General Description
2019_200000XXXX-V0
IDEMIA DOCUMENT - REPRODUCTION AND DISCLOSURE PROHIBITED
26
December 2018
MorphoAccess® VP MD Technical Characteristics
Item
Description
Access control modes
Identification (search for multimodal biometric data in a
local database)
Authentication with contactless card, with or without
multimodal biometric data check (only if terminal
equipped with a smartcard reader)
Multi-factor: identification or authentication
Proxy: the access control check is fully driven by a
remote system
Man Machine Interface
Multi color LED
Multi tone Buzzer
Biometrics
MorphoSmart™ FINGER VP Biometric module inside for
multimodal biometric comparison.
With 500dpi, 256 gray levels optical sensor, PIV IQS
certified by the FBI
False Acceptance Rate (FAR) adjustable from 10
-2
down
to 10
-8
Database capacity: 5000 users (standard) or 10 000
users (with specific license).
Log capacity
100 000 records (standard) and up to 1 000 000 (with
specific license)
LAN/WLAN connection
For terminal configuration and data transfer:
Ethernet 10/100 Base T (MDI, MDI-X)
Or Wi-Fi™ Wireless LAN (option), WEP, WPA (PSK) and
WPA2 (PSK) encryption available
Either TCP, TLS or SSL protocol
RFID cards (depending
on product version)
MIFARE® 1k, 4k
MIFARE® PLUS S (SL1, SL3) 2k, 4k
DESFire® 2k, 4k, 8k
Serial port
The serial port supports WIEGAND, DATACLOCK (ISO2)
and RS485 protocols