Installation Guide

MorphoAccess® VP MD – Installation Guide
Annex 1 : Finger Placement Recommendations
2019_200000XXXX-V0
IDEMIA DOCUMENT - REPRODUCTION AND DISCLOSURE PROHIBITED
37
December 2018
Power Supply
POE and external power supply can be used simultaneously, but when both power
supplies are available, priority is given to external power supply. If the external power
supply fails or is shut down, the terminal will go off and then restart using POE.
External Power supply
Figure 12: Power supply wiring
1
Red
Power Supply 12V
In
Positive 12 Volts, power supply
2
Black
Power ground
In
Ground power supply
External power supply
 Must comply with CEE/IEC EN60950 standard.
 12V to 24V DC (regulated) 1 Amp min at 12V.
 Could be provided by a 12 Volts Wiegand power supply, which complies with the
Security Industry Association's Wiegand standard March 1995.)
POE (Power Over Ethernet)
MorphoAccess® VP MD terminal's power supply can also be provided by the Ethernet
using RJ45 connection (Power Over Ethernet mode - IEEE802.3af or IEEE802.3at type 1
compliant).