Installation Guide

51
VisionPass - 2019_2000045728
4.7 > Serial port wiring
DataClock Input
21 Green / Red WIEGAND_IN0 In
Data (Output type required: Open
drain only)
23 White / Red WIEGAND_IN1 In
Clock (Output type required: Open
drain only)
16 Yellow GPO0 Out
Card present signal (if configured,
only one selectable for Morpho
Legacy)
27 Black / Red WIEGAND_GND Ground for Wiegand
Figure 24: Serial port wiring – DataClock Input
DataClock Output
24 Green WIEGAND _OUT0 Out Data ( 5V TTL )
26 White WIEGAND _OUT1 Out Clock ( 5V TTL )
25 Blue WIEGAND_LEDOUT1 In
LED IN 1 (option): panel feedback
(Output type required: Open drain or
5V+/-5%)
28 Blue / Red WIEGAND_LEDOUT2 In
LED IN 2 (option): panel feedback
(Output type required: Open drain or
5V+/-5%)
27 Black / Red WIEGAND_GND Ground for Wiegand
Figure 25: Serial port wiring – DataClock Output