User's Manual

i-CARD User’s Guide
_____________________________________________________________________________________
Document # 7007-0001, Rev B - 10 –
3.2.4 Windows CE
Be sure that you have your handheld device in its cradle and that you have an
Active Sync session established between your PC and the Handheld. As this step
may vary depending on your Handheld, consult your Handheld user’s manual if you
require assistance in establishing an Active Sync session.
Determine whether your handheld device has a MIPS or StrongArm Processor and
select the appropriate folder.
• MIPS = Symbol 27xx series
• StrongArm= Symbol 28xx series, Symbol 81xx series, and Compaq i-PAQs
Select the setup.exe for your Processor type
icard_mips_setup.exe = MIPS Processor
icard_arm_setup.exe = StrongArm Processor
Double-click on the setup.exe and an installation wizard begins with the following
screen:
Select Next and follow the installation instructions. When the Default Directory
dialogue box appears, select Yes and continue the installation process.
Finally, you will be prompted to check your handheld device for additional
installation steps. These steps will vary depending on the handheld device used.
Note: When the installation is finished you must power off your handheld device
and power it back on to complete the driver initialization.
The hardware driver installation is now complete.