User's Manual

_____________________________________________________________________________________
Document # 7007-0001, Rev B - iii –
Radio Frequency Compliance Statement
IDENTEC SOLUTIONS, Inc. is the responsible party for the compliance of the following
devices:
MODEL: i-PORT i-CARD i-Qxx TAGS
FCC ID: O2E-ILR-IPORT O2E-ICARD-NA OO4-ILR-IQ8T or
OO4-ILR-IQR
CANADA: 35381032062A 35381032231 35381021756A or
35381021825
EUROPE: CE 0678(!) CE 0678(!) CE 0682(!)
TYPE: II/S N/A SL/xx
The user(s) of these products are cautioned to only use accessories and peripherals
approved, in advance, by IDENTEC SOLUTIONS, Inc. The use of accessories and peripherals,
other than those approved by IDENTEC SOLUTIONS, Inc., or unauthorized changes to
approved products, may void the compliance of these products and may result in the loss of
the user(s) authority to operate the equipment.
Operation is subject to the following conditions: (1) these devices may not cause harmful
interference, and (2) these devices must accept any interference, including interference that
may cause undesired operation of the device.
FCC Compliance
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communication. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at his/her own expense.
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
Industry Canada Compliance
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.
To reduce potential radio interference to other users, the antenna type and its gain should be
so chosen that the equivalent isotropically radiated power (EIRP) is not more than that
required for successful communication.
The installer of this radio equipment must ensure that the antenna is located or pointed such
that it does not emit RF field in excess of Health Canada limits for the general population;
consult Safety Code 6, obtainable from Health Canada.