User's Manual

i-CARD User’s Guide
_____________________________________________________________________________________
Document # 7007-0001, Rev B - 8 –
3.2.2 Windows 98/ME
The following section describes how to install the device driver on Windows 98 and
Windows ME. When the i-CARD is inserted into the PC slot, an installation wizard
begins automatically and the following screen appears:
Select the Search for a suitable driver for my device option and click Next.
Selecting a search location depends on the type of
ILR® Installation Disk you
received. If you received a floppy disk, the search location is the A: drive. If you
received a CD, the search location is the D: drive.
For a search location, select the Floppy Disk Drives option, and click Next. Click the
Browse button to copy drivers from your
ILR® Installation Disk:
Using the Browse dialog box, select the \drivers\Windows 98 folder. Select the
i-CARD.inf file, then click OK.
Note: The driver used for Windows ME is the same as Windows 98 and is stored in
the subfolder Windows 98 on the
ILR® Installation Disk.
The hardware driver is loaded and a confirmation screen appears. This screen
verifies that the installation has completed successfully. Click Next to complete the
installation.
The hardware driver installation is now complete.