User's Manual

ManualsBrandsIdentec Solutions ManualsElectronicsiPoint X (ATEX) UHF / NFC / LF reader

iPOINT X – Hardware User Manual | 18.06.2020

2.2 System Components – Tags

Identec offers a wide range of tags that can be used with the iPOINT X. The tags provide long range

communication with the readers of up to 500 m (1640 ft), using advanced UHF radio frequency technology.

i-Q355 Tags

Using advanced UHF radio frequency technology, i-Q355 tags transmit

and receive data at distances of up to 250 m (820 feet). In addition, they

can be configured to beacon data at a configurable ping rate to a range of

up to 500 m (1640 ft).

These active RFID tags are particularly suited for:

- Access Control

- Identification

- Tracking and Tracing

- Zone localization

i-Q350 Tags

Using advanced UHF radio frequency technology, i-Q350 tags transmit

and receive data at distances of up to 250 m (820 feet). In addition, they

can be configured to beacon data at a configurable ping rate to a range of

up to 500 m (1640 ft).

These active RFID tags are particularly suited for:

- Identification

- Tracking and Tracing

- Localization

Environmental Data Sensing

i-B350 Tags

IDENTEC SOLUTIONS' i-B350 tags are designed to be cost effective and

easy to implement, while offering maximum flexibility. The beacon ILR

Tags continually send out their ID at pre-programmed intervals. They do

not need to be interrogated in order for them to send their information—

they do it automatically.

These active RFID tags are particularly suited for:

- Access control

- Tracking of Vehicles and Containers

- Online inventory

- Localization of assets at specific areas DELIVERED.

All Tag types are available with the following options:

Marker technology

for locating goods, vehicles, etc. The Marker technology allows selective locating of a

transponder, for example in adjacent car tracks or gate applications. Here the inductive Marker field informs

the ILR

Tag about its current location.

Temperature sensor and logging

: These types contain an internal sensor for temperature monitoring in order

to measure and log the temperature of goods in definable intervals. They are also available with external

sensors.

LED

for visual recognition, such as, for example, for "pick by light" applications. The light is visible from

almost every direction.