User's Manual

i-B2L P
www.identecsolutions.com
Europe:
Austria: IDENTEC SOLUTIONS AG, Millennium Park 2, 6890 Lustenau / AUSTRIA Tel: [phone] Fax: [phone]
Germany: IDENTEC SOLUTIONS Deutschland GmbH, Hertzstr. 10, 69469 Weinheim / GERMANY Tel.: [phone] Fax: [phone]
North America:
USA: IDENTEC SOLUTIONS INC., Liberty Plaza II, 5057 Keller Springs Rd. Suite 375, Addison, Texas 75001 Tel: [phone] Fax: [phone]
IDENTEC SOLUTIONS
IDENTEC SOLUTIONS is a leading global
supplier of innovative RFID systems (Radio
Frequency Identification) with
communication ranges of up to 100 metres.
With its unique Intelligent Long Range
®
(ILR
®
) technology, IDENTEC SOLUTIONS
offers innovative and economical solutions
for automated data gathering, identification,
tracking, and localization of objects.
The OIS product range offers automatic
identification systems of different
technologies, suitable for operation in the
rough environment as in industry and
logistics while providing high reliability. OIS
transponders are equipped with up to
32 kBytes of memory and can withstand up
to 235 °C.
To learn more about how ILR
and OIS
technology can increase the efficiency of
your business, contact IDENTEC
SOLUTIONS or visit our website at
www.identecsolutions.com.
In Austria:
[phone], or
[e-mail]
In Germany:
[phone], or
[e-mail]
In North America:
1-866-402-4211 (toll free), or
[e-mail]
Information in this document is subject to change without
notice and becomes contractual only after written
confirmation by IDENTEC SOLUTIONS.
“IDENTEC SOLUTIONS”, “Intelligent Long Range”, “ILR”,
“i-LINKS”, “i-B”, “i-D”, “i-Q”, “i-CARD”, “i-PORT”,
“Solutions. It’s in our name.”, “Smarten up your assets.“
and the stylized “i” are trademarks or registered
trademarks of IDENTEC SOLUTIONS, Inc. and/or IDENTEC
SOLUTIONS AG.
Copyright © 2008 by IDENTEC SOLUTIONS.
All rights reserved.
Reg.-No. ID.0637.EN — Issue 0 — July 2008
Technical Data
Operating Data Long-Range RFID (ILR, Beacon Technology)
Read range Up to 100 m in free air
Operating frequency 868 MHz (EU) or 915 MHz (NA) ISM band
Operation mode Transmits marker information in at regular intervals
Repetition rate (ping rate) 0,5 – 60 seconds, adjustable in steps of 0,5 seconds
Transmit power < 1 mW
Compatibility i-PORT 4B, i-PORT MB, i-CARD CF B
Operating Data Inductive Loop (Marker)
Read range Up to several meters
Operating frequency 125 kHz (world-wide approved)
Operation mode Receives marker ID number and transmits marker
information several times
Electrical Data
Power supply Lithium battery (not replaceable)
Battery lifetime expectancy > 1 years @ 5 seconds ping rate and 3600 seconds
per day inside the marker field
> 2 years @ 10 seconds ping rate and 3600 seconds
per day inside the marker field
Configuration
The transponder is configured using the i-B2-Programmer in a distance of max. 5 cm.
Ping rate Configurable from 0.5 to 60 seconds
in steps of 0.5 seconds
Number of burst Configurable from 0 to 15
Environmental Conditions
Operating temperature –20 to +70 °C (–4 to +158 °F)
Shock 1 m free fall, 3 times onto concrete floor,
DIN IEC 68-2-27
Vibration 3 G, 20 sine wave cycles, 5 to 150 Hz,
DIN IEC 68-2-6
5 G, noise 5 to 1.000 Hz, 30 minutes
DIN IEC 68-2-64
Mechanical Data
Dimensions 87 × 50 × 7 mm (3,4 × 2 × 0.28 inches)
Casing Plastics (Luran® S), light grey
Mass 27.5 g
Protection class IP 52
EMC
Certifications CE (EN 300 220-1, -3; ETSI EN 301 489-1, -3),
FCC Part 15 (US), Industry Canada
FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is
subjected to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
WARNING:
Changes or modifications not expressly approved by manufacturer
could void the user’s authority to operate the equipment.