User's Manual

VISIBILITY DELIVERED. PAGE 11 OF 15
2 Configuration of the tag
The i-B350L S is configured using the i-PROG M350L programming device.
Important Note
Do not open the housing! Configuration is done using the built-in air interface of the i-B350L S.
In addition to the Broadcast mode the i-B350L S offers the following special functions that can be configured:
 Bursts on entering a marker field can be configured independent from regular Pings
 Marker technology
 Bursts triggered by the push button can be configured independent from regular Pings
Tools Needed
 PC running on MS Windows with the ILR Tag Configuration for ILR 350 series tags
 Connected to an i-PROG M350L to configure the tags
The ILR Tag Configuration software tool is described in detail in this manual:
 ILR 350 Tag Configuration Plug-In Manual
Overview on the Configuration Software
Select Ping Rate and Ping
Message Content in the block
―Broadcast‖
Select Burst behavior on
entering a marker field in
the block ―Marker‖
Select Burst behavior when
the button is pressed in the
block ―Push Button‖