User's Manual

VISIBILITY DELIVERED. PAGE 20 OF 21
7 Technical Data
Operating Data
Operating frequency ILR-RFID 868 MHz (EU) or 920 MHz (NA)
Maximum transmission power 0.75mW (EU / NA)
Compatibility i-PORT M 350, i-CARD CF-350
Standards/Certification FCC Part 15 (US), ETSI EN 300 220 (EU)
Communication Data Long-Range RFID (ILR, Beacon Technology)
Read range broadcast Up to 150 m (490 feet) free air*
Operation mode Transmits marker information in at regular intervals
Repetition rate (ping rate) 0,5 – 300 seconds, adjustable in steps of 0,5 seconds
Data rate broadcast 115.2 kbits/s
*The communication range depends on the antenna type, the antenna
cable runs and the environmental conditions.
Communication Data Inductive Loop (Marker)
Read range Up to several meters
Operating frequency 125 kHz (world-wide approved)
Operation mode Receives marker ID number and transmits marker information several
times
Electrical Data
Power supply Lithium battery (not replaceable)
Configuration
Ping rate Configurable from 0.5 to 300 seconds
in steps of 0.5 seconds
Number of Bursts Configurable from 0 to 15
Environmental Conditions
Operating temperature –30 to +70 °C (–22 to +158 °F)
Shock 50 G, 3 times acc. DIN IEC 68-2-27
several times onto concrete floor from 1 m height
Vibration 3 G, 20 sine wave cycles, 5 to 150 Hz,
DIN IEC 68-2-6
5 G, noise 5 to 1.000 Hz, 30 minutes
DIN IEC 68-2-64
Mechanical Data
Dimensions 52 × 42 × 14mm (2.04 × 1.65 × 0.55 inches)
Casing Plastics
Mass 40 g
Protection class IP 68
Certifications
EMC CE (EN 300 220-1, -3; ETSI EN 301 489-1, -3),
FCC Part 15 (US), Industry Canada