User's Manual

Compact Flash ILR Interrogator
Page 10 of 15
3.2.1 Windows 2000/Windows XP
The following section describes how to install the device driver on Windows 2000 and Windows XP.
When the i-CARD CF-350 is inserted into the CF slot, an installation wizard begins automatically.
Select the “Search for a suitable driver for my device” option and click “Next”.
Selecting a search location depends on the type of ILR
®
Technical CD you received.
For a search location, select the “Floppy Disk Drives” option, and click “Next”. Click the “Browse”
button to copy drivers from your ILR
®
Technical CD:
Using the “Browse” dialog box, select the
\ILR_Support_Kit\iCARD CF\Drivers\Win_2000_XP folder. Select the iCARD-CF.inf file, then click OK.
The hardware driver is loaded and a confirmation screen appears. This screen verifies that the
installation has completed successfully. Click Next to complete the installation.
The hardware driver installation is now complete.
Note
There is no special driver on the CD. Supplied .inf file instructs Windows to use the standard serial
driver contained in the system.
Note
If you have problems installing the driver under Windows 2000 please make sure you have the latest
Service Pack installed. Please refer to Article 281505 in Microsoft Knowledge Base.