User's Manual

i-CARD CF-350
Page 3 of 15
Radio Frequency Compliance Statement
The user(s) of the product described within this document are cautioned to only use accessories and
peripherals approved, in advance, by IDENTEC SOLUTIONS, Inc. The use of accessories and
peripherals, other than those approved by IDENTEC SOLUTIONS, Inc., or unauthorized changes to
approved products, may void the compliance of these products and may result in the loss of the
user(s) authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:
(1) these devices may not cause harmful interference, and (2) these devices must accept any
interference, including interference that may cause undesired operation of the device.
FCC Compliance (i-CARD CF-350 / NA)
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communication.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his/her own expense.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Industry Canada Compliance (i-CARD CF-350 / NA)
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
To reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for
successful communication.
This device has been designed to operate with the antennas listed below, and having a maximum
gain of 0 dB. Antennas not included in this list or having a gain greater than 0 dB are strictly
prohibited for use with this device. The required antenna impedance is 50 Ohm.
• Antenna: MDM-9000P, manufactured by MOBILE MARK (EUROPE), LTD.