User Manual

i-CARD III User’s Guide
_____________________________________________________________________________________
Document #: 9000-041, Rev C - 10 –
2.2.3 Windows CE
Step1: Be sure you have your Handheld device in its Cradle and that you
have an Active Sync session established between your PC and the Handheld.
Consult your Handheld user’s manual if you require assistance in establishing
an Active Sync session.
Step2: Confirm your handheld device has the StrongArm Processor.
Step3: Execute the setup.exe
icard_arm_setup.exe
Step4: Double click on the setup.exe and an installation wizard begins with
the following screen:
Select next and follow the installation instructions. When the default
directory dialogue box appears, select ‘Yes’ and continue the installation
process.
Finally, you will be prompted to check your Handheld device for additional
installation steps. These steps will vary depending on the Handheld device
used.
When the install is finished you must power off your handheld and power it
back on to complete the driver initialization.
The hardware driver installation is now complete.