User Manual

_____________________________________________________________________________________
Document #: 9000-041, Rev C - iii –
Radio Frequency Compliance Statement
IDENTEC SOLUTIONS, Inc. is the responsible party for the compliance of the following
device:
MODEL: i-CARD III
FCC ID: O2E-ILR-ICARDIII
CANADA: 3538B-ICARDIII
EUROPE: CE 0678(!)
The user(s) of these products are cautioned to only use accessories and peripherals
approved, in advance, by IDENTEC SOLUTIONS. The use of accessories and peripherals,
other than those approved by IDENTEC SOLUTIONS, or unauthorized changes to approved
products, may void the compliance of these products and may result in the loss of the
user(s) authority to operate the equipment.
Operation is subject to the following conditions: (1) these devices may not cause harmful
interference, and (2) these devices must accept any interference, including interference that
may cause undesired operation of the device.
FCC Compliance (i-CARD III / NA)
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communication. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at his/her own expense.
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
FCC External Label Requirements (i-CARD III/NA)
In accordance with FCC requirements, when this equipment is installed inside
another device, such that the product label is no longer visible, the device must bear
the following label referring to the enclosed module:
The installer of this device is responsible to ensure this label is applied in accordance with
these requirements.
Contains FCC ID:
O2E-ILR-ICARDIII