User's Manual

i-PORT M 350, i-SAT 300 RTLS, i-PORT M 350 RTLS
Page 15 of 30
3.7 Ethernet Connector
The Ethernet interface is an option for an i-PORT M 350 RTLS.
Warning
Do not connect any device to your network before it has been configured. Before connecting to your
network, check that the desired IP address has been set. A not-configured device may have any IP
address. A device with the wrong settings may impede the functioning of your network.
Ethernet interface with 10 or 100Mbit/s. Connect the central unit to your network with a wired 1:1
network cable. The host connection is a RJ45 socket. Use a regular Ethernet cable here.
The allocation corresponds to that of simple network adapters in PCs (10/100-Base T). Therefore, to
connect to the network or the hub, a simple 1:1 network cable is required.
If you want to connect directly to a computer you must use a so-called crossed cable.
View into the connector = crimp/solder side of plug
Pin To Slave T568B color Description
1 TxD+ White/orange
2 TxD– Orange
3 RxD+ White/Green
4 Blue
5 White/Blue
6 RxD– Green
7 White/Brown
8 GND Brown