User's Manual
Table Of Contents
i-PORT M 350, i-SAT 300 RTLS, i-PORT M 350 RTLS
Page 17 of 30
4.3 Configuration of the Ethernet Interface
Tools needed
• PC with working Ethernet NIC running MS Windows for configuration software
• Software “Device Discovery Utility”
• Crossover Ethernet cable
• Power supply (24 VDC) for the i-PORT
• Network settings from your network administrator
Prepare the PC
• Disconnect the PC from the network
• Set the Ethernet connection of the PC to DHCP (described below)
• Switch off the proxy settings of the standard web browser
After finishing the configuration of all i-PORTs restore the previous settings of the PC.
In order to gain access to the network settings of the PC, double click on the network icon in the
systray. The icon appears as two computer symbols.
Now click on “Properties”.