User's Manual

i-PORT 350/250 USB - BT
USER GUIDE
VISIBILITY DELIVERED. PAGE 14 OF 22
4. USING THE READER
The reader can communicate to a host device via USB or via built in Bluetooth functionality. The
following chapters explain how to establish a connection with either USB or Bluetooth.
4.1. CHECK CONTENT
The mobile reader is packaged together with a power supply plug and a USB cable.
4.2. GET FAMILIAR
The reader is packaged together with a power supply plug and a USB cable.
UHF
Sending a command: As long as wake up is sent, the UHF
Led is green. If a packet is received as a valid answer, goes
red. (Giving an orange effect).
Beacon receiving: beacon message is detected -> UHF goes
green. If this sensor is a new Tag in the reader’s list, it
goes orange. If it is already in the list it stays green.
RUN
Device is running properly (LED blinks at approx 1Hz).
BUS
Blinks GREEN when data is received from the host. Blinks
RED when sending data to the host.