ILR 350 Series Installation and Operation Manual for Tag Models i-Q350, i-Q350T, i-Q350L, i-Q350TL
Installation and Operation Manual Proprietary Notice This document contains confidential information proprietary to IDENTEC SOLUTIONS and may not be used or disclosed to other parties in whole or in part without prior written authorization from IDENTEC SOLUTIONS.
i-Q350TL Tag Manual Radio Frequency Compliance Statement IDENTEC SOLUTIONS is the responsible party for the compliance of the following devices: MODELS: Region/Country EUROPE: USA Canada i-Q350, i-Q350L, i-Q350T, i-Q350TL Organization EC FCC Industry Canada Marking CE FFC ID IQ350TL IC:3538A-IQ350TL The user(s) of these products are cautioned to only use accessories and peripherals approved, in advance, by IDENTEC SOLUTIONS.
Installation and Operation Manual Contents 1 INTRODUCTION ...........................................................................................................5 1.1 1.2 1.3 1.4 1.5 1.6 PREPARATIONS ............................................................................................................ 5 RECOMMENDED PROCEDURE ............................................................................................ 5 SCOPE OF THIS DOCUMENT ......................................................
i-Q350TL Tag Manual 1 1.1 Introduction Preparations This installation manual must be read carefully prior to starting the installation. The described installation works assume that installation materials like cable, antenna and tag holder etc are available. 1.2 Recommended Procedure 1. 2. 3. 4. Check the Scope of Delivery according to the Bill of Delivery Read this manual completely Mount the tags An additional performance check of the tags and a system test can now be done 1.
Installation and Operation Manual 2 Safety Precautions Important Safety Note The devices described in this manual is for exclusive operation by trained employees. Only qualified personnel that know the potential dangers involved should perform the installation, settings, maintenance and repair of the units used.
i-Q350TL Tag Manual 3 Tag Mounting Techniques 3.1 Rivets 3/16” dia. blind rivet (M5) Important Information 1. 2. 3. 4. 5. A temperature of at least +10 °C (+50 °F) must be maintained during riveting to prevent the casing from cracking. Always position the blind-rivet gun straight down on the rivet site and all the way to the rivet socket. On occasion, a tag casing has been damaged through improper handling of the blind-rivet gun (slanted positioning of the gun to access the rivet socket).
Installation and Operation Manual 3.2 Screws i.e. #10 cylinder head or lenticular head screws i.e. 3/16” hexagonal locknut with 3/16” washer OR 3/16” hexagonal nut, but together with spring washer or 3/16” Nordlock washer Important Information 1. 2. 3. 4. 5. 6. 7. Only screws with cylindrical heads are suitable for mounting the tag. We do not advise using countersunk screws.
i-Q350TL Tag Manual 4 4.1 Maintenance General In principle, the ILR system is maintenance-free. When correctly installed it operates for many years without any problems. 4.2 Precautionary Maintenance Regular checking of all ports and cables belonging to the system is recommended. Unstable connections could lead to damage and malfunctions of the system and therefore should be repaired as soon as possible.
Installation and Operation Manual 5 Technical Data Operating Data Operating frequency ILR-RFID Maximum transmission power Compatibility Standards/Certification 868 MHz (EU) or 920 MHz (NA), further frequencies on request 0.
i-Q350TL Tag Manual Dimensional Drawing All dimensions in mm. External cable to temperature sensor (models i-Q350T & i-Q350TL) not shown.
