User's Manual
Table Of Contents
- Legal information
- Introduction to the manual
- General information about SDI011
- SDI011 characteristics
- Software modules
- Commands description
- Generic APDU
- Set of APDU for contactless storage user tokens
- Set of APDU for ISO/IEC14443-4 user tokens
- Set of APDU defined by SCM Microsystems
- Escape commands for the contactless interface
- Sending escape commands to SDI011
- Escape command codes
- READER_GETCARDINFO
- READER_LED_CONTROL_BY_FW
- READER_LEDCONTROL
- READER_CNTLESS_GET_MFRC_REV
- READER_CNTLESS_GET_ATS_ATQB
- READER_CNTLESS_GET_TYPE
- READER_CNTLESS_SET_TYPE
- READER_CNTLESS_RF_SWITCH
- READER_CNTLESS_RAW_CFG
- READER_CNTLESS_RAW_XMIT_EX
- READER_ CNTLESS_DISABLE_PPS
- READER_SWITCH_RF_ON_OFF
- READER_CNTLESS_848KBPS
- READER_CNTLESS_BAUDRATE
- READER_CNTLESS_FORCE_BAUDRATE_PCSC_REV2
- Escape commands for the contact interface
- Annexes
SDI011 REFERENCE MANUAL 21
4.1.2. Software architecture
Applications can interface with the driver directly through the PC/SC interface.
The SDI011 driver implements PC/SC v2.0 API towards upper layers and uses SCM firmware
commands encapsulated in CCID-like protocol for the contactless slot and full CCID for the
contact slot.
The SDI011 contactless driver handles all the contactless-related intelligence – i.e. ISO/IEC
14443 and the SDI011 firmware handles the raw transport of data to and from the contactless
cards.