User's Manual
Table Of Contents
- Legal information
- Introduction to the manual
- General information about SDI011
- SDI011 characteristics
- Software modules
- Commands description
- Generic APDU
- Set of APDU for contactless storage user tokens
- Set of APDU for ISO/IEC14443-4 user tokens
- Set of APDU defined by SCM Microsystems
- Escape commands for the contactless interface
- Sending escape commands to SDI011
- Escape command codes
- READER_GETCARDINFO
- READER_LED_CONTROL_BY_FW
- READER_LEDCONTROL
- READER_CNTLESS_GET_MFRC_REV
- READER_CNTLESS_GET_ATS_ATQB
- READER_CNTLESS_GET_TYPE
- READER_CNTLESS_SET_TYPE
- READER_CNTLESS_RF_SWITCH
- READER_CNTLESS_RAW_CFG
- READER_CNTLESS_RAW_XMIT_EX
- READER_ CNTLESS_DISABLE_PPS
- READER_SWITCH_RF_ON_OFF
- READER_CNTLESS_848KBPS
- READER_CNTLESS_BAUDRATE
- READER_CNTLESS_FORCE_BAUDRATE_PCSC_REV2
- Escape commands for the contact interface
- Annexes
SDI011 REFERENCE MANUAL 43
6.3. Set of APDU for ISO/IEC14443-4 user tokens
6.3.1. T=CL Command
Description
SDI011 can transfer directly ISO/IEC7816-4 APDU to the PICC.
SDI011 supports user tokens that have both the MIFARE and T=CL partitions. Depending on
the APDU sent by the host, the reader switches to the corresponding mode (MIFARE or T=CL)
automatically and the command is processed accordingly.
6.3.1.1. Format
CLA
INS
P1
P2
P3
Data
Description of the APDU commands can be found in ISO/IEC 7816-4 specification.
6.3.1.2. Response
Data Out
PICC answer as defined in ISO/IEC 7816-4+ SW1 + SW2
As defined in ISO/IEC 7816-4.
6.3.1.3. Status Words
SW1
SW2
Description
See ISO/IEC 7816-4
As defined in ISO/IEC 7816-4.
6.3.1.4. Example
The following APDU sequence reads the first 256 bytes of the data group 1 as specified in
ICAO LDS (logical data structure) for machine readable travel documents with open access. It
first selects the issuer application using its AID (0xA0 0x00 0x00 0x02 0x47 0x10 0x01), then
selects the DG1 file (0x01 0x01) and then does a read binary.