User's Manual
Table Of Contents
- Legal information
- Introduction to the manual
- General information about SDI011
- SDI011 characteristics
- Software modules
- Commands description
- Generic APDU
- Set of APDU for contactless storage user tokens
- Set of APDU for ISO/IEC14443-4 user tokens
- Set of APDU defined by SCM Microsystems
- Escape commands for the contactless interface
- Sending escape commands to SDI011
- Escape command codes
- READER_GETCARDINFO
- READER_LED_CONTROL_BY_FW
- READER_LEDCONTROL
- READER_CNTLESS_GET_MFRC_REV
- READER_CNTLESS_GET_ATS_ATQB
- READER_CNTLESS_GET_TYPE
- READER_CNTLESS_SET_TYPE
- READER_CNTLESS_RF_SWITCH
- READER_CNTLESS_RAW_CFG
- READER_CNTLESS_RAW_XMIT_EX
- READER_ CNTLESS_DISABLE_PPS
- READER_SWITCH_RF_ON_OFF
- READER_CNTLESS_848KBPS
- READER_CNTLESS_BAUDRATE
- READER_CNTLESS_FORCE_BAUDRATE_PCSC_REV2
- Escape commands for the contact interface
- Annexes
SDI011 REFERENCE MANUAL 61
7. Annexes
7.1. Annex A – Status words table
SW1
SW2
Description
0x90
0x00
NO ERROR
0x67
0x00
LENGTH INCORRECT
0x6D
0x00
INVALID INSTRUCTION BYTE
0x6E
0x00
CLASS NOT SUPPORTED
0x6F
0x00
UNKNOWN COMMAND
0x63
0x00
NO INFORMATION GIVEN
0x65
0x81
MEMORY FAILURE
0x68
0x00
CLASS BYTE INCORRECT
0x69
0x82
Command not allowed, security status not
satisfied
0x6A
0x81
FUNCTION NOT SUPPORTED
0x6B
0x00
WRONG PARAMETER P1-P2