User's Manual

TouchSecure® Connectivity User Manual
IDT.QM.P2.T1.DT
Ver1.0
Page 8 of 11
Printed copies of this document are uncontrolled
Internal Use Only
5.4 Mounting the Reader
5.4.1 Location of mounting holes on wall
Phoenix connector Reader – 2 Holes and 1 Slot
5.4.2 Reader Installation Steps
a. Make two holes on the wall as per the image above.
b. Insert the nylon screw plugs into the wall.
c. Connect the wires as per the Table 2 or Table 3.
d. TouchSecure® reader with Bottom Casing is to be now secured onto the wall using the
Screws (A #6-18X1.5" SS )
e. The top casing can be inserted onto the bottom casing
f. Secure the Top and bottom casing by the Snake Eye Screw (SMF #6-32X5/16" SS)