User's Manual

TouchSecure® Connectivity User Manual
IDT.QM.P2.T1.DT
Ver1.0
Page 5 of 11
Printed copies of this document are uncontrolled
Internal Use Only
2.3 Back Plate
3.0 Product details
Model Name : Connectivity WM
Device Type : RFID reader, 13.56MHz (HF) / 125 KHz (LF)
Physical Access control Reader (accessory equipment)
Type of equipment : Potted reader. Suitable for Indoor / Controlled Outdoor use
Interface Type : Pigtail Cable (11 Core + Drain) or Phoenix connectors and RJ45
Voltage Rating : 5-16V DC or 48VDC on RJ45 Connector
Current Rating @12V : Pk Current – 180mA , Average Current 120mA
Communication protocol : Wiegand, RS485 (2wire - Half Duplex) , 10BaseT ETH
4.0 Specifications
Model
Op Voltage
Current @ 12V
Op temp
Cable Length
Connectivity WM
5-16 VDC or
POE@ 48VDC
Av -120mA
Pk -180mA -35 to +65 Deg C
RS485 - 4000ft (24AWG)
Wiegand -500ft (22AWG)/
300ft (24AWG)
Table 1