User's Manual

TouchSecure® Connectivity User Manual
IDT.QM.P2.T1.DT
Ver1.0
Page 7 of 11
Printed copies of this document are uncontrolled
Internal Use Only
5.3.2 Pin out for Phoenix Connector Reader
Pin
Cable colour
Description
Comment
P1.1
Orange
LED Green
P1.2
White
Data 1
P1.3
Green
Data 0
P1.4
Black
Drain
P1.5
Black + White
Gnd
P1.6
Red
Power
Do not connect when reader is powered by PoE
P2.1
Blue
Hold
P2.2
Violet
Tamper
P2.3
Gray
RS485-
P2.4
Pink
RS485+
P2.5
Yellow
Buzzer
P2.6
Brown
LED Red
Table 3
Caution:
During Wiring make sure that the +VDC lines does not make contact with any other cables, as it might
affect reader functionality/ cause damage to the reader.