User's Manual

Department
MIFCM – User manual
Version 1.00
Internal 3 (8)
Idesco Oy | Teknologiantie 9, FIN-90590 OULU | Tel [phone] | [e-mail] | www.idesco.fi
1. Introduction
MIFCM is a Radio Frequency Identification (RFID) -reader to automatically and uniquely identify and
track inventory and assets. Transponders can be read without line of sight. Read range can be up to
a several centimeters depending on transponder size and shape.
2. Technical Specification
2.1. Operating voltage, power, electrical interfaces
Current consumption is 300 mA max.
Operating voltage range are 11,4 – 12,6 VDC.
2.2. Functions and properties
Product description
Reader supports Mifare Classic 13,56 MHz technology. The reader is controlled with serial communi-
cation commands or depending on software it can function independently.
Led
LED and its controls can be connected to I/O interfaces.
Buzzer
Buzzer is optional. Its controls can be connected to I/O interfaces.
Housing
The reader has mounting holes in the corners of the PCB.
2.3. Interfaces
Reader Interface
The reader can be equipped with RS232 and optional RS485. Wiegand is an option.
Interface output
The reader uses Idesco serial communication protocol.
Cable
The reader’s serial communication and power are connected to separate connectors.
2.4. Performance
Reading distance
Reading distance with IA013CM antenna is minimum 9 mm.