User Manual
22 23
INSTALLATION - 3-WAY
STEP 1
Turn OFF the power at the circuit breaker.
STEP 2
Remove the existing faceplates and switches from the gang boxes.
Take a photo of the existing wiring for future reference.
STEP 3
Conrm that each gang box contains a neutral wire (typically white).
If there are no neutral wires present, you may need to run additional
wires, please consult a qualied electrician.
NOTE: Your home’s wiring may differ; please consult a qualied electrician.
TRAVELER
(Usually Black or Red)
TRAVELER
(Usually Black or Red)
NEUTRAL
(Usually White)
LINE
(Usually Black)
LOAD
(Usually Black)
GROUND
(Usually Bare Copper or Green)
GROUND
(Usually Bare Copper or Green)