User Manual

32 33
STEP 9
Extend the pull out tab on the front of the Dimmer Switch
connected to the load wire (identied in step 5). Using a ballpoint
pen, put an “X” in the box to indicate that this is the Primary Switch.
STEP 10
Turn the power back ON at the circuit breaker and conrm that the
LED on both Wall Switches light up purple.
Dimmer Switch - Model: IDEV0009
Primary Secondary
XXX-XX-XXXX
Ensure LED
is purple on
BOTH Wall
Switches
Dimmer Switch - Model: IDEV0009
Primary Secondary
XXX-XX-XXXX