User Manual

36 37

STEP 2

Locate the Primary Switch. Hold “6” until the LED rapidly ashes

blue (3 seconds) then release. Next tap “1” to enter pairing mode.

The LED will slowly ash blue.

Next locate the Secondary Switch. Repeat the steps above on the

Secondary Switch by holding “6” until the LED rapidly ashes blue

(3 seconds) then release. Next tap “1” to begin the pairing mode.

The LED will ash blue slowly.

The Secondary Dimmer Switch will search and pair to the Primary

Switch. The LED on each Dimmer Switch will rapidly blink green

5 times and each Dimmer Switch will beep 5 times to indicate the

pairing process is complete.