User Manual
6 7
GETTING TO KNOW THE
iDEVICES
®
DIMMER SWITCH
1
1
6
7
4
4
2
2
5
56
7
3
3
Turn Light On/Up Dimming. Single tap to turn light on. Press and hold
to increase brightness. Double tap to increase light to max brightness.
Also, used for 3-way and 4-way pairing.
Turn Light Off/Down Dimming. Single tap to turn light off. Press and
hold to dim light. Double tap to decrease light to minimum dim level.
Also, used for connecting to the Wi-Fi
®
network.
Status LED/Night Light. Provides setup status and used as a night
light during operation. Refer to LED color codes on page 42.
Pull Out Tab. Refer to this when prompted to enter your HomeKit™ setup
code during the setup on a iOS device. Also used to document the Dimmer
Switch as the Primary or Secondary in a 3-way or 4-way conguration.
Device Reboot. Pressing this
cycles power to the device.
Pairing Setup Button. Used to
wirelessly pair multiple Dimmer
Switches for 3-way and 4-way
congurations and for connecting
to the Wi-Fi
®
network.
DEVICE RESET: Press and hold for
10 seconds until LED blinks red.
Air Gap Switch. Pull air gap
switch out to disconnect the
power when replacing light bulbs.