User Manual
8 9
INSTALLATION - SINGLE POLE
STEP 1
Turn OFF the power at the circuit breaker.
STEP 2
Remove the existing faceplate and switch from the gang box. Take a
photo of the existing wiring for future reference.
STEP 3
Conrm the gang box contains a neutral wire (typically white). If
there are no neutral wires present, you may need to run additional
wires, please consult a qualied electrician.
NOTE: Your home’s wiring may differ; please consult a qualied electrician.
GROUND
(Usually Bare Copper or Green)
LOAD
(Usually Black)
LINE
(Usually Black,
Red or Blue)
NEUTRAL
(Usually White)
GROUND
(Usually Bare Copper
or Green)